---
title: "How to speed up a video (or slow it down) free · Cutshed"
description: "Speed a video up or slow it down free in the browser. Choose 0.5×, 0.75×, 1.5×, or 2×. atempo keeps the pitch. The result is a new MP4. Nothing is uploaded."
canonical: "https://cutshed.com/blog/how-to-speed-up-a-video/"
---

# How to speed up a video (or slow it down) free · Cutshed

Speed a video up or slow it down free in the browser. Choose 0.5×, 0.75×, 1.5×, or 2×. atempo keeps the pitch. The result is a new MP4. Nothing is uploaded.

- Products
- Studio
- Video Game Clipper
- Stream Clipper
- Week of Shorts
- Editor
- Free tools
Audio
- Vocal remover
- Audio trimmer
- Ringtone maker
- Audio converter
- Volume booster
- Noise remover
- BPM and key
- Pitch and speed
- Clip sound effects
- AI audio maker
Video
- Video editor
- Video compressor
- Video trimmer
- Crop and resize
- Frames and thumbnails
- Mute video
- Video speed
- Merge clips
- Video to MP3
- Video to GIF
- Video splitter
- Week of Shorts
Image
- Background remover
- Image upscaler
- Image converter
- Thumbnail maker
- AI emoji maker
Subtitles & text
- Subtitle generator
- Subtitle translator
- Timing shifter
- Transcript to post
- Resources
- Menu
Resources
Audio
- Vocal remover
- Audio trimmer
- Ringtone maker
- Audio converter
- Volume booster
- Noise remover
- BPM and key
- Pitch and speed
- Clip sound effects
- AI audio maker
Video
- Video editor
- Video compressor
- Video trimmer
- Crop and resize
- Frames and thumbnails
- Mute video
- Video speed
- Merge clips
- Video to MP3
- Video to GIF
- Video splitter
- Week of Shorts
Image
- Background remover
- Image upscaler
- Image converter
- Thumbnail maker
- AI emoji maker
Subtitles & text
- Subtitle generator
- Subtitle translator
- Timing shifter
- Transcript to post
- Home
- / Blog
- / How to speed up a video (or slow it down) for free
How to
# How to speed up a video (or slow it down) for free
Published November 16, 2026 .
Open Video speed, drop a clip, and pick 0.5×, 0.75×, 1.5×, or 2×. Click Change speed. The picture uses setpts. The audio uses atempo, which keeps the pitch. The result is a new H.264 and AAC MP4, and the duration scales with the speed. Nothing is uploaded. Files over 200 MB are refused. When the browser can read the duration, a clip longer than 3 minutes is refused too. A clip with no audio track fails, because the filter maps an audio stream.
The tool for this is Video speed . It retimes a video you already have and writes a new MP4. The file stays in the tab. Use a clip you are allowed to post.
The menu has four speeds: 0.5×, 0.75×, 1.5×, and 2×. It opens on 2×. There is no 1×, because that would be the file you already have, and there is no field for 1.1× or 3×. Picture and sound are retimed by the same factor, so they stay together.
## Steps
- Drop a clip Open Video speed and drop the file. The picker accepts video files plus .mp4, .webm, .mov, .mkv, and .m4v. A file over 200 MB is refused when you click Change speed. When the browser can read a duration longer than 3 minutes, that clip is refused too. If the duration cannot be read, the size check still runs. The source file is not edited.
- Pick 0.5×, 0.75×, 1.5×, or 2× The Speed menu opens on 2×. 2× is the fast end. 1.5× is the milder speedup. 0.75× is a slight slowdown. 0.5× is half speed. Those four are the whole list. Each one sits inside a single atempo stage, which is why the page does not offer a speed outside 0.5× to 2×.
- Click Change speed The button reads Change speed, then Rendering. The first run downloads ffmpeg, about 31 MB, and caches it in the browser. Later jobs in the same browser reuse that download. The filter is setpts on the picture and atempo on the audio. For 2× that is setpts=0.50000*PTS and atempo=2.00000. For 0.5× it is setpts=2.00000*PTS and atempo=0.50000. For 1.5× the picture factor is 0.66667. For 0.75× it is 1.33333. The encode maps both streams, writes libx264 ultrafast, yuv420p, and AAC at 128 kbps, and names the file out.mp4 inside the encoder. Nothing is uploaded.
- Play the new MP4 before you leave When the job finishes, the status says Rendered at the speed you picked, and a video player appears under the button. This page does not add a separate download button. The player is the result. Save it from the browser before you close the tab. Closing the tab drops the result. The file you dropped is still the original.
## What the video speed page will and will not do
## Which of the four speeds to pick
2× is the speed the menu opens on, and it is the useful one for a screen recording that drags. Pauses get short. Clicks still land, because the picture and the audio move by the same factor. A tutorial where 2× feels rushed, but the original still drags, is the 1.5× case. You cannot type 1.25× here. That speed exists on the audio-only page, not on this one.
0.75× is the small slowdown. A line that went by too fast, or a beat you want to see a little longer, fits it. 0.5× is for a short action, not for a whole minute. Slowing a long clip holds every frame for twice as long and the encode still has to write the longer file. The tool page already says 0.5× on a short action beat is enough.
Duration scales with the speed. setpts uses 1 divided by the speed, so a clip at 2× comes back half as long and a clip at 0.5× comes back twice as long. 1.5× and 0.75× follow the same rule. The page does not pad the file back to the original length.
## What happens to the audio
The audio filter is atempo. atempo changes tempo and is built to hold pitch. A 2× voice is shorter, not higher. A 0.5× voice is longer, not lower. This is not the chipmunk effect of playing a tape faster. If a page or a memory of an editor says the voice rises with the speed, that is a different filter. This page does not use asetrate.
Audio-only tempo and pitch are a different tool. Pitch and speed takes a voice or a music stem, not a video. The speed menu there is 0.5×, 0.75×, 1×, 1.25×, 1.5×, and 2×. Speed alone is atempo, so the pitch stays. Semitones run from −12 to +12 in steps of 1. A semitone change resamples with asetrate at the shifted rate, aresample brings the rate back, and atempo undoes the duration change. Leaving both at the original is refused. The download is 16-bit WAV. Files over 15 minutes or 80 MB are refused there. Use that page when you want the voice in a different key. Use Video speed when the picture has to move with the sound.
If the sped-up voice is the part you do not want, run Mute video on the new MP4. Mute tries to copy the picture and drop the audio, and re-encodes the picture only when the container will not allow a copy. Do not mute first. Video speed maps an audio stream. A clip that already has no audio track fails the speed encode. The order is speed, then mute.
## Why slow motion can look stepped
setpts changes when each existing frame is shown. It does not invent frames between them. There is no frame interpolation and no frame blend on this page. At 0.5× every source frame is held for twice as long, so motion that was smooth can look stepped. A higher source frame rate has more frames to hold. The page cannot add the ones the camera never shot.
That is also why 0.5× on a long clip is a poor trade. You wait for a longer encode and the motion still steps. Cut the moment down first on Video trimmer if only one beat needs to be slow. The trimmer takes a start and an end in seconds and re-encodes that span, so the first frame is the time you typed rather than the previous keyframe. Its limit is the same 3 minutes or 200 MB.
## Speed up only part of a clip
Video speed retimes the whole file you drop. It cannot speed the middle and leave the head alone. Video splitter is not the workaround. It cuts equal lengths, such as 14.9 seconds, not an arbitrary middle.
The trimmer keeps one span per run. To speed only a middle section, trim the head, the middle, and the tail as three separate downloads. Each one is a new H.264 and AAC MP4. Run Video speed on the middle file only. Then join them with Merge clips . Merge takes two files per pass, and both need an audio track. They are scaled into a 640×360 frame, padded rather than stretched, set to 24 fps, and concatenated in the order you picked them. Audio is resampled to 44.1 kHz stereo. A third piece is a second pass: merge the first result with the remaining file. A silent piece fails the join, because the filter expects audio on both sides.
Editor can split a clip at the playhead and trim the head or tail, then export an MP4 or WebM. It does not change playback speed. Use it to assemble titles, transitions, and a second track. Use Video speed when the job is the speed itself.
After the new MP4 exists, two other jobs are common. A chat limit is how to compress a video for Discord . A tall frame is how to crop a video to 9:16 . A silent loop of a short moment, with no audio at all, is how to make a GIF from a video . The GIF page caps a selection at 15 seconds and does not write an audio stream.
On a phone, the built-in editor on an iPhone, the built-in editor on Android, and CapCut each include a speed control. The labels and the speed list differ by app and by version, so this guide does not name a menu path or a speed those apps may not offer. Use them when the file is already on the phone. The Cutshed page is the one that runs setpts and atempo in the browser and does not upload the file.
## Do this part in Cutshed
- Video speed 0.5×, 0.75×, 1.5×, or 2×. setpts on the picture, atempo on the audio, so the pitch stays. New H.264 and AAC MP4. 200 MB, and 3 minutes when the duration can be read. Nothing is uploaded.
- Pitch and speed Audio only. Speeds are 0.5×, 0.75×, 1×, 1.25×, 1.5×, and 2×. Semitones from −12 to +12. Speed keeps pitch. A semitone shift retunes. 16-bit WAV.
- Mute video Drops the audio after you have the sped-up MP4. Muting first removes the track Video speed needs.
- Video trimmer Keeps one start-to-end span as a new MP4, so you can speed that piece alone. Same 3 minute and 200 MB limit.
- Compress video Re-encodes the sped-up MP4 toward a size, including the Discord 10 MB and 25 MB presets.
- Editor Timeline, titles, split, and trim. Export is MP4 or WebM. It does not change playback speed.
## FAQ
- How do I speed up a video for free without an app?
Open Video speed in the browser, drop the file, pick 0.5×, 0.75×, 1.5×, or 2×, and click Change speed. There is no account. The work runs in the tab. The source has to be 200 MB or under, and 3 minutes or under when the duration can be read.
- Does 2× make the voice higher?
No. The audio filter is atempo, which keeps the pitch. At 2× the voice is shorter. At 0.5× it is longer. A change of key is the semitone control on Pitch and speed, and that page is audio only.
- Is the video uploaded?
No. ffmpeg.wasm reads the file in the tab. The first run downloads about 31 MB of that runtime and caches it. The video itself is not sent anywhere.
- Why does slow motion look stepped?
setpts holds the frames the file already has. The page does not invent in-between frames. At 0.5× each frame stays up for twice as long, so motion can look stepped.
- Can I speed up only part of a clip?
Not in one pass. Trim the head, the middle, and the tail as separate files, speed the middle, then merge two files at a time. Merge needs audio on both clips and writes a 640×360, 24 fps MP4. The editor can split and trim, and it does not change speed.
- What if the clip has no audio?
The encode maps an audio stream, so a clip with no audio track fails. Mute video is the tool that removes sound, and it belongs after a successful speed change, not before.
Files stay on this device.
Free tools never upload the file you open. Studio is the only paid part of the site, and the only place a prompt is sent to a video model.

## Links

- [C Cutshed](/)
- [Studio](/studio/)
- [Video Game Clipper](/video-game-clipper/)
- [Stream Clipper](/stream-clipper/)
- [Week of Shorts](/stream-to-shorts/)
- [Editor](/editor/)
- [Free tools](/#tool-grid)
- [Vocal remover](/vocal-remover/)
- [Audio trimmer](/audio-trimmer/)
- [Ringtone maker](/ringtone-maker/)
- [Audio converter](/audio-converter/)
- [Volume booster](/volume/)
- [Noise remover](/noise-remover/)
- [BPM and key](/bpm-key/)
- [Pitch and speed](/pitch-speed/)
- [Clip sound effects](/clip-sound-effects/)
- [AI audio maker](/ai-audio/)
- [Video compressor](/video-compressor/)
- [Video trimmer](/video-trimmer/)
- [Crop and resize](/video-crop/)
- [Frames and thumbnails](/video-frames/)
- [Mute video](/mute-video/)
- [Video speed](/video-speed/)
- [Merge clips](/merge-clips/)
- [Video to MP3](/video-to-mp3/)
- [Video to GIF](/video-to-gif/)
- [Video splitter](/video-splitter/)
- [Background remover](/background-remover/)
- [Image upscaler](/image-upscaler/)
- [Image converter](/image-converter/)
- [Thumbnail maker](/thumbnail-maker/)
- [AI emoji maker](/ai-emoji-maker/)
- [Subtitle generator](/subtitles/)
- [Subtitle translator](/subtitle-translator/)
- [Timing shifter](/subtitle-shifter/)
- [Transcript to post](/transcript/)
- [Blog](/blog/)
- [Compare](/compare/)
- [Developers](/developers/)
- [Seedance 2.5](/seedance-2-5/)
- [Privacy](/privacy/)

